Copper · Stub Ends & Collars
C12200 DHP Copper Stub Ends & Collars
Deoxidised high-residual-phosphorus (DHP) copper (C12200) in stub ends & collars form. The standard grade for copper tube: fully deoxidised, easy to braze, solder and weld, with good formability.
- Material
- Copper
- Grade (UNS)
- C12200
- Product
- Stub Ends & Collars
- Category
- Stub Ends / Collars

Overview
Stub ends and collars used with backing flanges to form lap-joint connections.
Chemical composition
| Element | Content (wt %) |
|---|---|
| Copper (Cu) | 99.90 min |
| Phosphorus (P) | 0.015–0.040 |
Typical physical properties
| Property | Value |
|---|---|
| Density | 8.94 g/cm³ (approximate) |
| Electrical conductivity | ≈85 % IACS (annealed) |
| Nearest EN designation | CW024A (Cu-DHP) – approximate equivalent |
| UNS number | C12200 |
Typical applications
- Water and gas tube
- Air-conditioning and refrigeration (ACR) tube
- Heat exchangers and condensers
- Brazed fittings
Commonly referenced standards
- Dimensions and tolerances per customer standard or drawing
Listed as common references for this product form; confirm the exact standard, grade coverage and sizes with Melta Alloys before ordering.
What to include in your enquiry
- Type
- Pipe size and wall thickness
- Length series
- Standard
- Quantity
- Material grade, destination country and any documents required
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Related pages
Other Copper Stub Ends & Collars grades
C12200 in other product forms
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
