Copper · Tube Fittings
C12200 DHP Copper Tube Fittings
Deoxidised high-residual-phosphorus (DHP) copper (C12200) in tube fittings form. The standard grade for copper tube: fully deoxidised, easy to braze, solder and weld, with good formability.
- Material
- Copper
- Grade (UNS)
- C12200
- Product
- Tube Fittings
- Category
- Compression / Tube Fittings

Overview
Fittings for joining tube, including compression, flared and soldered types.
Chemical composition
| Element | Content (wt %) |
|---|---|
| Copper (Cu) | 99.90 min |
| Phosphorus (P) | 0.015–0.040 |
Typical physical properties
| Property | Value |
|---|---|
| Density | 8.94 g/cm³ (approximate) |
| Electrical conductivity | ≈85 % IACS (annealed) |
| Nearest EN designation | CW024A (Cu-DHP) – approximate equivalent |
| UNS number | C12200 |
Typical applications
- Water and gas tube
- Air-conditioning and refrigeration (ACR) tube
- Heat exchangers and condensers
- Brazed fittings
Commonly referenced standards
- ASME B16.26 – cast copper-alloy fittings for flared copper tubes
- Other dimensions per customer drawing
Listed as common references for this product form; confirm the exact standard, grade coverage and sizes with Melta Alloys before ordering.
What to include in your enquiry
- Fitting type
- Tube outside diameter
- Thread or end connection
- Standard
- Quantity
- Material grade, destination country and any documents required
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Related pages
Other Copper Tube Fittings grades
C12200 in other product forms
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
