Brass products
Brass grades & product forms
Brass is a copper-zinc alloy. Raising the zinc content increases strength; adding lead improves machinability; adding tin, aluminium or arsenic improves corrosion resistance in water and seawater.

Guidance
Choosing a brass grade
- Choose 70/30 brass (C26000) for deep drawing and cold forming.
- Choose free-cutting brass (C36000) for high-speed machined parts.
- Choose naval, admiralty or aluminium brass (C46400, C44300, C68700) for marine and condenser service.
Technical data
Brass grades at a glance
| Grade | Alloy | Key composition (wt %) | Density (g/cm³) | Typical uses |
|---|---|---|---|---|
| C26000 | Cartridge brass (70/30) | Cu 68.5–71.5, Pb 0.07 max, Fe 0.05 max | 8.53 | Deep-drawn and stamped parts, radiator cores and tanks |
| C27000 | Yellow brass (65/35) | Cu 63.0–68.5, Pb 0.10 max, Fe 0.07 max | 8.47 | Rivets and screws, cold-headed and formed parts |
| C27200 | Yellow brass (63/37) | Cu 62.0–65.0, Pb 0.07 max, Fe 0.07 max | 8.44 | Rivets and screws, cold-headed parts |
| C33000 | Low-leaded brass (tube grade) | Cu 65.0–68.0, Pb 0.25–0.7, Fe 0.07 max | 8.5 | Plumbing and pump tube, liners |
| C44300 | Admiralty brass (arsenical) | Cu 70.0–73.0, Sn 0.8–1.2, As 0.02–0.06 | 8.53 | Condenser and heat-exchanger tubes, evaporators |
| C46400 | Naval brass (60/39/1) | Cu 59.0–62.0, Sn 0.5–1.0, Pb 0.20 max | 8.41 | Marine hardware, propeller shafts |
| C68700 | Aluminium brass (arsenical) | Cu 76.0–79.0, Al 1.8–2.5, As 0.02–0.06 | 8.33 | Condenser, evaporator and heat-exchanger tubes, seawater and desalination service |
| C35300 | High-leaded brass (62/2) | Cu 60.0–63.0, Pb 1.5–2.5, Fe 0.15 max | 8.5 | Clock and instrument parts, gears |
| C36000 | Free-cutting brass | Cu 60.0–63.0, Pb 2.5–3.7, Fe 0.35 max | 8.5 | Screw-machine products, fittings and valve parts |
| C37700 | Forging brass (60/2) | Cu 58.0–61.0, Pb 1.5–2.5, Fe 0.30 max | 8.44 | Hot-forged parts, valve bodies |
| C46200 | High-tensile naval brass | Cu 62.0–65.0, Sn 0.5–1.0, Pb 0.20 max | 8.41 | Marine hardware, shafts |
| C48200 | Naval brass, medium leaded | Cu 59.0–62.0, Sn 0.5–1.0, Pb 0.4–1.0 | 8.44 | Machined marine hardware, shafts |
| C48500 | Naval brass, high leaded | Cu 59.0–62.0, Sn 0.5–1.0, Pb 1.3–2.2 | 8.44 | Machined marine hardware, shafts |
| C26800 | Yellow brass (66/34) | Cu 64.0–68.5, Pb 0.15 max, Fe 0.05 max | 8.47 | Stamped and formed parts, hardware |
| C28000 | Muntz metal (60/40) | Cu 59.0–63.0, Pb 0.30 max, Fe 0.07 max | 8.39 | Condenser plates and tubesheets, architectural and marine hardware |
| C83600 | Leaded red brass (85-5-5-5), cast | Cu 84.0–86.0, Sn 4.0–6.0, Pb 4.0–6.0 | 8.8 | Valves, pump bodies and impellers |
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Browse
Brass product types and grades

Pipes & Tubes
7 grades · Pipes / Tubes

Round Bars & Rods
11 grades · Round Bars / Rods

Flat Bars
10 grades · Flat Bars

Square Bars
10 grades · Square Bars

Hex Bars
11 grades · Hex Bars

Plates & Sheets
8 grades · Plates / Sheets

Fittings
6 grades · Pipe Fittings

Flanges
7 grades · Flanges

Stub Ends & Collars
3 grades · Stub Ends / Collars

Tube Fittings
5 grades · Compression / Tube Fittings

Fasteners
4 grades · Fasteners

Stud & Threaded Rods
4 grades · Fasteners

Welding Rods
0 grades · Other Products

Wires
0 grades · Other Products

Foils
0 grades · Other Products

Strips
0 grades · Other Products

Compression Fittings
0 grades · Compression / Tube Fittings

Gaskets
0 grades · Other Products
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
