Metal weight calculator
Estimate theoretical weight from material, shape and dimensions.
Enter dimensions and press Calculate.
Estimates only. Actual weight varies with alloy composition, tolerances (including wall thickness and corner radii) and manufacturing. Density values are approximate reference values that must be verified before launch.
Method
Formulas used
Weight = cross-section area × length × density. Dimensions are converted to millimetres internally, and results are shown in kg and lb.
| Shape | Cross-section area | Notes |
|---|---|---|
| Pipe / tube (OD) | π × t × (OD − t) | Wall thickness must be less than OD ÷ 2 |
| Pipe / tube (ID) | π × t × (ID + t) | OD = ID + 2t |
| Plate / sheet | thickness × width | |
| Round bar | π × d² ÷ 4 | |
| Flat bar | width × thickness | |
| Square bar | side² | |
| Hex bar | (√3 ÷ 2) × AF² | AF = across flats |
| Square tube | S² − (S − 2t)² | Sharp corners assumed |
| Rectangular tube | W×H − (W − 2t)(H − 2t) | Sharp corners assumed |
Need a firm quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
