Product category
Fasteners
Bolts, nuts, studs and threaded rods in corrosion-resistant copper alloys.

Fasteners
Bolts, nuts, screws and washers for corrosion-resistant or conductive fastening.
Typical uses
- Marine and chemical equipment
- Electrical connections
- Architectural hardware
What to include in your enquiry
- Fastener type
- Size and thread
- Length
- Property class or standard
- Quantity

Copper Fasteners
Commonly referenced standards: ASTM F468 – nonferrous bolts, screws and studs; ASTM F467 – nonferrous nuts; ASME B18.2.1 / B18.2.2 – dimensions

Brass Fasteners
Commonly referenced standards: ASTM F468 – nonferrous bolts, screws and studs; ASTM F467 – nonferrous nuts; ASME B18.2.1 / B18.2.2 – dimensions

Bronze Fasteners
- All grades
- C51000 Phosphor Bronze 5%
- C61400 Aluminium Bronze
- C63000 Nickel Aluminium Bronze
- C65500 High Silicon Bronze
- C67500 Manganese Bronze
Commonly referenced standards: ASTM F468 – nonferrous bolts, screws and studs; ASTM F467 – nonferrous nuts; ASME B18.2.1 / B18.2.2 – dimensions
Stud & Threaded Rods
Fully or partially threaded rods and studs.
Typical uses
- Flange bolting
- Electrical connections
- Fabricated assemblies
What to include in your enquiry
- Diameter and thread pitch
- Length
- Thread form
- Standard
- Quantity

Copper Stud & Threaded Rods
Commonly referenced standards: ASTM F468 – nonferrous bolts, screws and studs; ASME B1.1 – unified inch screw threads

Brass Stud & Threaded Rods
Commonly referenced standards: ASTM F468 – nonferrous bolts, screws and studs; ASME B1.1 – unified inch screw threads

Bronze Stud & Threaded Rods
- All grades
- C61400 Aluminium Bronze
- C63000 Nickel Aluminium Bronze
- C65500 High Silicon Bronze
- C67500 Manganese Bronze
Commonly referenced standards: ASTM F468 – nonferrous bolts, screws and studs; ASME B1.1 – unified inch screw threads
Standards are commonly referenced for this product form, not a statement that every size or grade is supplied to each one; confirm per enquiry. Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Photo gallery
Fasteners – product photos
Representative product photos. Actual material, grade and finish are confirmed on your quotation.
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.























