Bronze · Stud & Threaded Rods
C63000 Nickel Aluminium Bronze Stud & Threaded Rods
Nickel-aluminium bronze (C63000) in stud & threaded rods form. High-strength aluminium bronze with strong resistance to seawater corrosion, cavitation and wear.
- Material
- Bronze
- Grade (UNS)
- C63000
- Product
- Stud & Threaded Rods
- Category
- Fasteners

Overview
Fully or partially threaded rods and studs.
Chemical composition
| Element | Content (wt %) |
|---|---|
| Aluminium (Al) | 9.0–11.0 |
| Nickel (Ni) | 4.0–5.5 |
| Iron (Fe) | 2.0–4.0 |
| Manganese (Mn) | 1.5 max |
| Silicon (Si) | 0.25 max |
| Zinc (Zn) | 0.30 max |
| Copper (Cu) | Remainder |
Typical physical properties
| Property | Value |
|---|---|
| Density | 7.58 g/cm³ (approximate) |
| Nearest EN designation | CW307G (CuAl10Ni5Fe4) – approximate equivalent |
| UNS number | C63000 |
Typical applications
- Marine fittings and shafts
- Pump and valve parts
- Gears
- Bearings
- Wear plates
Commonly referenced standards
- ASTM F468 – nonferrous bolts, screws and studs
- ASME B1.1 – unified inch screw threads
Listed as common references for this product form; confirm the exact standard, grade coverage and sizes with Melta Alloys before ordering.
What to include in your enquiry
- Diameter and thread pitch
- Length
- Thread form
- Standard
- Quantity
- Material grade, destination country and any documents required
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Related pages
Other Bronze Stud & Threaded Rods grades
C63000 in other product forms
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
