Bronze · Stud & Threaded Rods
C67500 Manganese Bronze Stud & Threaded Rods
Manganese bronze (A) (C67500) in stud & threaded rods form. High-strength copper-zinc alloy with iron, tin and manganese additions.
- Material
- Bronze
- Grade (UNS)
- C67500
- Product
- Stud & Threaded Rods
- Category
- Fasteners

Overview
Fully or partially threaded rods and studs.
Chemical composition
| Element | Content (wt %) |
|---|---|
| Copper (Cu) | 57.0–60.0 |
| Iron (Fe) | 0.8–2.0 |
| Tin (Sn) | 0.5–1.5 |
| Manganese (Mn) | 0.05–0.50 |
| Lead (Pb) | 0.20 max |
| Zinc (Zn) | Remainder |
Typical physical properties
| Property | Value |
|---|---|
| Density | 8.36 g/cm³ (approximate) |
| UNS number | C67500 |
Typical applications
- Marine fittings
- Valve stems
- Shafts
- Clutch discs
- Bolts
Although named a bronze, manganese bronze (A) is a copper-zinc (brass-type) alloy.
Commonly referenced standards
- ASTM F468 – nonferrous bolts, screws and studs
- ASME B1.1 – unified inch screw threads
Listed as common references for this product form; confirm the exact standard, grade coverage and sizes with Melta Alloys before ordering.
What to include in your enquiry
- Diameter and thread pitch
- Length
- Thread form
- Standard
- Quantity
- Material grade, destination country and any documents required
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Related pages
Other Bronze Stud & Threaded Rods grades
C67500 in other product forms
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
