Copper · Fasteners
C11000 ETP Copper Fasteners
Electrolytic tough-pitch (ETP) copper (C11000) in fasteners form. The most widely used copper grade. Contains a small amount of oxygen (typically 0.02–0.04 %), so it is not suited to brazing or welding in hydrogen-rich atmospheres.
- Material
- Copper
- Grade (UNS)
- C11000
- Product
- Fasteners
- Category
- Fasteners

Overview
Bolts, nuts, screws and washers for corrosion-resistant or conductive fastening.
Chemical composition
| Element | Content (wt %) |
|---|---|
| Copper (Cu) | 99.90 min |
Typical physical properties
| Property | Value |
|---|---|
| Density | 8.89 g/cm³ (approximate) |
| Electrical conductivity | ≥100 % IACS (annealed) |
| Nearest EN designation | CW004A (Cu-ETP) – approximate equivalent |
| UNS number | C11000 |
Typical applications
- Bus bars and electrical conductors
- Terminals and contacts
- Rolled sheet and strip
- Roofing and gaskets
- General fabrication
Commonly referenced standards
- ASTM F468 – nonferrous bolts, screws and studs
- ASTM F467 – nonferrous nuts
- ASME B18.2.1 / B18.2.2 – dimensions
Listed as common references for this product form; confirm the exact standard, grade coverage and sizes with Melta Alloys before ordering.
What to include in your enquiry
- Fastener type
- Size and thread
- Length
- Property class or standard
- Quantity
- Material grade, destination country and any documents required
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Related pages
Other Copper Fasteners grades
C11000 in other product forms
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
