Manufacturer & exporter · Umbergaon, Gujarat, India
One range.
Every grade of copper, brass & bronze.
Pipes, tubes, bars, plates, sheets, fittings and flanges in copper and copper-alloy grades. Browse by material, UNS grade and product type, check the technical data, then send an RFQ.



Representative product images
Three families
Browse by material

Copper
Copper offers very high electrical and thermal conductivity, excellent ductility and good corrosion resistance.…
23 product types · 6 grades · 91 pages
Browse copper
Brass
Brass is a copper-zinc alloy. Raising the zinc content increases strength; adding lead improves machinability; adding…
18 product types · 16 grades · 104 pages
Browse brass
Bronze
Bronzes are copper alloys with tin, aluminium or silicon as the main addition. They are chosen for strength, wear…
21 product types · 14 grades · 103 pages
Browse bronze
Engineered for the job
Our products

Pipes / Tubes
24 listings

Tubes / Coils
7 listings

Pipe Fittings
23 listings

Buttweld Fittings
8 listings

Forged Fittings
8 listings

Flanges
20 listings

Round Bars / Rods
32 listings

Flat Bars
25 listings

Square Bars
25 listings

Hex Bars
25 listings

Plates / Sheets
23 listings
- S
Stub Ends / Collars
12 listings

Compression / Tube Fittings
18 listings
- F
Fasteners
29 listings

Other Products
19 listings
About
Who we are
Melta Alloys is a manufacturer and exporter of copper and copper-alloy products based in Umbergaon, District Valsad, Gujarat. Our range covers copper, brass and bronze in many UNS grades and product forms.
- Pick a grade. Use the product pages and technical data.
- Send your specification. Dimensions, quantity, standard and destination.
- Get a quotation. We reply by email or phone.
Specify by UNS number
A UNS number such as C36000 fixes the composition range of an alloy, which makes quotations unambiguous. Our technical data lists composition limits, density and typical uses for every grade on this site.
Applications
One range, many industries
Electrical & Power
Copper conductors and connectors rely on high conductivity. Oxygen-free and ETP copper are the usual starting points.
Grades commonly considered: C10100, C10200, C11000
Plumbing, HVAC & Refrigeration
Phosphorus-deoxidised copper tube and coils are the standard for water, gas and refrigerant lines, with matching fittings.
Grades commonly considered: C12000, C12200, C26000
Marine & Shipbuilding
Naval brass, aluminium brass and aluminium bronzes are chosen for seawater corrosion resistance and strength.
Grades commonly considered: C46400, C68700, C63000, C95800
Valves, Pumps & Fluid Control
Forging brass, gunmetal and leaded tin bronzes give pressure-tight bodies, seats and bushings.
Grades commonly considered: C37700, C83600, C90500, C92200
Engineering & Machined Components
Free-cutting brass and bearing bronzes are machined into fittings, bushings, gears and fasteners.
Grades commonly considered: C36000, C35300, C54400, C93200
Heat Exchangers & Condensers
Admiralty brass, aluminium brass and DHP copper tube, with condenser plates, handle water and seawater service.
Grades commonly considered: C44300, C68700, C12200, C28000
Technical data
Popular grades at a glance
| Grade | Alloy | Key composition (wt %) | Typical use |
|---|---|---|---|
| C11000 | Electrolytic tough-pitch (ETP) copper | Cu 99.90 min | Bus bars and electrical conductors |
| C12200 | Deoxidised high-residual-phosphorus (DHP) copper | Cu 99.90 min, P 0.015–0.040 | Water and gas tube |
| C36000 | Free-cutting brass | Cu 60.0–63.0, Pb 2.5–3.7, Fe 0.35 max | Screw-machine products |
| C46400 | Naval brass (60/39/1) | Cu 59.0–62.0, Sn 0.5–1.0, Pb 0.20 max | Marine hardware |
| C63000 | Nickel-aluminium bronze | Al 9.0–11.0, Ni 4.0–5.5, Fe 2.0–4.0 | Marine fittings and shafts |
| C95800 | Nickel-aluminium bronze, cast | Cu 79.0 min, Al 8.5–9.5, Ni 4.0–5.0 | Marine propellers |
Free tool
Calculate before you order
Estimate the weight of pipes, tubes, plates and bars in copper, brass, bronze, copper-nickel, stainless steel, carbon steel and nickel alloys.
Learn
Insights and technical guides

Technical guide
Copper, brass and bronze: what is the difference?
A plain-language guide to the three copper-alloy families and when each is used.
Read guide
Technical guide
How to read a UNS grade number
What C11000, C36000 or C63000 tell you at a glance.
Read guide
Technical guide
What to include in a copper-alloy RFQ
A checklist that helps a supplier quote accurately the first time.
Read guide
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
