Brass · Plates & Sheets
C46200 High Tensile Naval Brass Plates & Sheets
High-tensile naval brass (C46200) in plates & sheets form. Tin-bearing alpha-beta brass with good strength and better corrosion resistance in seawater than plain brass.
- Material
- Brass
- Grade (UNS)
- C46200
- Product
- Plates & Sheets
- Category
- Plates / Sheets

Overview
Flat-rolled plate and sheet for fabrication, stamping and heat-transfer plates.
Chemical composition
| Element | Content (wt %) |
|---|---|
| Copper (Cu) | 62.0–65.0 |
| Tin (Sn) | 0.5–1.0 |
| Lead (Pb) | 0.20 max |
| Iron (Fe) | 0.10 max |
| Zinc (Zn) | Remainder |
Typical physical properties
| Property | Value |
|---|---|
| Density | 8.41 g/cm³ (approximate) |
| UNS number | C46200 |
Typical applications
- Marine hardware
- Shafts
- Valve stems
- Fasteners
- Condenser plates
Commonly referenced standards
- ASTM B36/B36M – plate, sheet, strip and rolled bar
- ASTM B19 – cartridge brass sheet, strip and plate
- ASTM B171 – condenser and heat-exchanger plate
Listed as common references for this product form; confirm the exact standard, grade coverage and sizes with Melta Alloys before ordering.
What to include in your enquiry
- Thickness × width × length
- Temper
- Finish
- Standard
- Quantity
- Material grade, destination country and any documents required
Technical data is general reference information (commonly published UNS and ASTM ranges), not a Melta Alloys test certificate. Always confirm against the governing standard and your material test certificate.
Related pages
Other Brass Plates & Sheets grades
- All grades
- C26000 Cartridge Brass
- C26800 Yellow Brass
- C27000 Yellow Brass
- C27200 Yellow Brass
- C28000 Muntz Brass
- C46400 Naval Brass
- C68700 Aluminium Brass
C46200 in other product forms
Need a quotation?
Send your grade, size, quantity and destination country, and we will come back to you.
